We are Authorised Dealer, Supplier, Service Provider of Pillar Drilling Machines, and our set up is situated in Pune, Maharashtra, India.
13 KSR
13mm Bench Drilling
| 13mm Bench Drilling Machine | |
| MODEL NO. | 13 KSR |
| CAPACITY | |
| Drilling capacity in Steel | 13 |
| Tapping Capacity in Steel | |
| SPINDLE | |
| Spindle travel | 80 |
| Spindle Taper | Solid |
| No. of Spindle speed | 04 |
| Range of Spindle Speed | 500 - 2825 |
| WORKING RANGE | |
| Column diameter | 46.80 |
| Max. distance between Spindle centyr to Column face | 152 |
| Max. distance between Spindle Nose to Working Table | 280 |
| Max. distance between spindle nose to Base plate | 495 |
| GENERAL | |
| Size of Square table | 210 x 215 |
| Size of Base Plate | 235 x 360 |
| Electric Motor | 3 phase, 0.5 HP,1440 RPM |
| V- Belt size | M-2360 |
| Net Weight of Machine | 48 Kg |
| Over all dimensions of the Machine | 750 x 335 x 375 |
| Wooden case Dimensions | 800 x 385 x 425 |
P-19
19mm Pillar Drilling
| 19 mm Cap. Pillar Drilling Machine | |
| MODEL NO. | 19 KBR |
| CAPACITY | |
| Drilling cap. in steel | 19 |
| Drilling capacity in C.I. | 22 |
| Tapping capacity in Steel | 16 |
| SPINDLE | |
| Spindle Travel | 125 |
| Spindle Taper | M T- 2 |
| No. of Spindle Speeds | 8 |
| Range of spindle Speeds | 86- 3360 |
| WORKING RANGE | |
| Column Diameter | 73.80 |
| Max. distance between Spindle Centre to Column face | 200 |
| Max. distance between Spindle nose to Working Table | 365 |
| Max. Distance between Spindle Nose to Base Plate | 635 |
| GENERAL | |
| Size of Square Table | 270 x 270 |
| Size of Base Plate | 550 x 315 |
| Electric Motor | T E F C, 3 Phase, 1 H.P., 1440 RPM, |
| V- Belt Size | A - 43 |
| Net Wr. of Machine in Kgs. | 99 |
| Overall dimensions of the machine | 1000 X 675 X 425 |
| Wooden Case Dimensions | 1050 x 725 x 475 |
P-25
| Pillar Drill Machines Specification Table | |||
| DESCRIPTION | P25 | ||
| CAPACITY | |||
| Drilling capacity in M.S. | 25 | ||
| Drilling capacity in C.I. | 32 | ||
| Boring in M.S. | |||
| tapping in M.S. | 15 | ||
| DRILLING HEAD | |||
| Spindle hole taper | MT- 3 | ||
| Spindle travel | 160 | ||
| Spindle Speeds ( RPM/steps) | 100-2650X8 | ||
| Diameter of RAM | 72 | ||
| Auto feed range (mm / rev ) | FINE FEED | ||
| WORKING RANGE | |||
| Max. dist. spindle nose to table | 560 | ||
| Spindle centre to column | 206 | ||
| Table size | 336 round | ||
| Machine measurements | 500x304x1600 | ||
| Column Diameter | 90 | ||
| Dist. from spindle Nose to Base | 950 | ||
| POWER | |||
| Motors | 1 HP | ||
| V-Belt | B-46 | ||
P-38
| Pillar Drill Machines Specification Table | |
| DESCRIPTION | P38 |
| CAPACITY | |
| Drilling capacity in M.S. | 38 |
| Drilling capacity in C.I. | 42 |
| Boring in M.S. | |
| tapping in M.S. | 20 |
| DRILLING HEAD | |
| Spindle hole taper | MT-4 |
| Spindle travel | 250 |
| Spindle Speeds ( RPM/steps) | 80-2600X8 |
| Diameter of RAM | 78 |
| Auto feed range (mm / rev ) | FINE FEED |
| WORKING RANGE | |
| Max. dist. spindle nose to table | 760 |
| Spindle centre to column | 321 |
| Table size | 450x600 |
| Machine measurements | 700x450x1830 |
| Column Diameter | 110 |
| Dist. from spindle Nose to Base | 970 |
| POWER | |
| Motors | 1.5 HP |
| V-Belt | |
40AA
| Pillar Drill Machines Specification Table | |
| DESCRIPTION | P40AA |
| CAPACITY | |
| Drilling capacity in M.S. | 40 |
| Drilling capacity in C.I. | 45 |
| Boring in M.S. | 75 |
| tapping in M.S. | 25 |
| DRILLING HEAD | |
| Spindle hole taper | MT -4 |
| Spindle travel | 250 |
| Spindle Speeds ( RPM/steps) | 88-1404X9 |
| Diameter of RAM | 78 |
| Auto feed range (mm / rev ) | 0.05 &0.09 |
| WORKING RANGE | |
| Max. dist. spindle nose to table | 530 |
| Spindle centre to column | 345 |
| Table size | 450x455 |
| Machine measurements | 880x675x1850 |
| Column Diameter | 130 |
| Dist. from spindle Nose to Base | 920 |
| POWER | |
| Motors | 1.5 HP |
| V-Belt | B-33X2 |